These re-lubrication metering devices provide flexible options of delivering precise and controlled lubrication outputs which meet exact requirements for diverse applications such as bearings, bushings, pins and slides that help ensure each lubrication point receives the proper amount of lubricant. Which means you won′t have to worry about over or under lubrication.
 

Area of application:

Re-lubrication distributors are used in applications where an excessively high and sudden pressure at the lubrication point is undesirable, for example, when lubricating slideways on grinding machines. Such pressure at the lubrication point can lead to undesirable rough grinding results. The expelling time of the re-lubrication distributor depends on the back pressures in the lubrication point lines. If, for example, the lubrication points are under heavy load during the lubrication cycle, the lubricant will be stored in the re-lubrication distributor and only fed upon movement or when pressure on the lubrication point is relieved. For commercial vehicle lubrication, this mode of operation is a significant advantage over manual lubrication which cannot always be performed on pressure-loaded bearings. Re-lubrication single piston distributor with casted manifold can provide different outputs per customer’s requirements. They distribute and meter the lubricant fed by an intermittently operated centralized lubrication pump unit in iSHAN & SMUS single- line centralized lubrication systems. In each lubrication cycle, a precisely metered quantity of lubricant, ranging from a minimum of 0.1 c.c. to a maximum of 0.5 c.c., is fed to the connected lubrication points.
 

Remark:

1. Oil viscosity permissible range from 30 to 150 cSt. at ambient temperature 40℃.
2. Output volume & max. operating pressure based on 68 cSt. of viscosity.